SK Hynix 7.68TB NVMe U.3 PCIe Gen 4.0 x4 RI SFF 2.5" 15mm SSD PE8110 Series for Dell PowerEdge Server
In-store Pickup
Local Pickup in Dallas, TX Available
- Specifications
- Description
| Manufacturer Part Number | 7.68TB PE8110 (with Dell PowerEdge Tray) |
| Manufacturer | SK Hynix |
| Condition | Refurbished |
| Standard Warranty | 90 Day Replacement Warranty |
| Item Category | Solid State Drives (SSD) |
| Model | PE8110 Series |
| Form Factor | |
| Interface | |
| External Interfaces | |
| Storage Capacity | |
| Transfer Rate | |
| Network Management Type | |
| Processor Type | |
| Clock Speed | |
| Number of Cores | |
| Cache | |
| Socket Type | |
| TDP | |
| Compatible Port | |
| Number of Ports | |
| CPU Type | |
| HDD Form Factor | |
| HDD Interface | |
| HDD Rotation Speed | |
| HDD Storage Capacity | |
| HDD Transfer Rate | |
| Memory Bus Speed | |
| Memory Capacity Per Module | |
| Memory Features | |
| Memory Form Factor | |
| Memory Kit Brand | |
| Memory Kit Breakdown | |
| Memory Kit Speed | |
| Memory Kit Technology | |
| Memory Kit Total Capacity | |
| Memory Kit Voltage | |
| Memory Number of Modules | |
| Memory Number of Pins | |
| Memory Total Capacity | |
| Memory Type | |
| Network Ports | |
| Processor Model | |
| SSD Capacity | |
| SSD Interface | |
| SSD Storage Capacity | |
| SSD Transfer Rate | |
| SSD Type |
SK Hynix 7.68TB NVMe U.3 PCIe Gen 4.0 x4 RI SFF 2.5" 15mm SSD for Dell PowerEdge Server PE8110 Series
Compatibility Note
The SK Hynix PE8110 Series U.3 NVMe SSD is compatible with Dell PowerEdge servers starting from 14th Generation and newer, provided the system is equipped with an NVMe-enabled backplane. Dell’s universal 2.5" SFF design allows use across multiple generations when properly configured.
Core Specifications
- Capacity: 7.68TB
- Interface: PCIe Gen4 x4 (NVMe 1.4)
- Form Factor: 2.5" SFF (15mm)
- Connector: U.3 (backward compatible with U.2)
- Series: SK Hynix PE8110
- Controller: SK Hynix Aquarius (ACNT036M)
- NAND Type: 128-layer 3D TLC ("4D NAND")
- Workload Type: Read Intensive (RI)
- Endurance: 1.0 DWPD
- MTBF: ~2.5–3.35 million hours
- Power Consumption: ~10W active / ~5–6W idle
- Security: Digitally Signed Firmware (DS)
Performance
- Sequential Read: Up to 6,200 MB/s
- Sequential Write: Up to 3,870 MB/s
- Random Read (4K): ~190,000–582,000 IOPS
- Random Write (4K): Up to ~190,000 IOPS
Dell PowerEdge Server Compatibility
17th Generation (PCIe Gen5 / Gen4 – Native Support):
R470, R570, R670, R6715, R6725, R770, R7715, R7725, R7725xd
16th Generation (PCIe Gen4 – Native Support):
R660, R6615, R6625, R760, R760xa, R760xs, R7615, R7625, R860, R960, T560, HS5610, HS5620
15th Generation (PCIe Gen4 – Native Support):
R350, R450, R550, R650, R650xs, R6515, R6525, R750, R750xa, R750xs, R7515, R7525, T550, XE8545
14th Generation (PCIe Gen3 – Reduced Performance):
R340, R440, R640, R6415, R740, R740xd, R7415, R7425, R840, R940, R940xa, T440, T640
Important Deployment Notes
-
Drive Tray Requirement:
Must be installed in a Dell 2.5" SFF hot-swap tray (commonly 0DXD9H / DXD9H or equivalent SFF carrier). The original HPE carrier is not compatible. -
Backplane Requirement:
NVMe-capable Dell PowerEdge backplane is required. SAS/SATA-only backplanes will not detect this drive. -
Interface Compatibility:
U.3 is backward compatible with U.2, but full functionality depends on NVMe wiring and system configuration. -
Performance Scaling:
- 16G–17G: Full PCIe Gen4 performance
- 15G: Full PCIe Gen4 performance
- 14G: Limited to PCIe Gen3 speeds (~3,500 MB/s max)
-
Management Behavior:
Dell iDRAC may report the drive as “non-Dell certified” or “unknown vendor,” but functionality is typically unaffected if NVMe requirements are met.
Summary
Enterprise-grade 7.68TB NVMe U.3 SSD optimized for read-intensive workloads, fully compatible with Dell PowerEdge 14G–17G servers when equipped with NVMe backplanes and proper SFF drive trays, with performance scaling by generation.